|
|
Technical Information:
| Herculift SDO V10E, Elite Series
1,000 Newton Power Output Two Year Warranty & Five Year on Motor | |
General Suitability:
Suit most residential car garage doors, sectional or tilting type with proper spring balance.
| Door height: 1400 mm to 3000 mm | Door width: up to 6500 mm | | Typical operating circle: 4-30 times a day | Recommended door operating force: < 25 Kilogram |
Installation Requirements:
Head Room Space: Min. 80 mm above the highest point of the door is recommended Horizontal Back Clearance: Door entry height plus 750 mm. Features | Benefits | Permanent Lubricated DC motor | Lower vibration, quieter than the AC motor drive.
Reduced chance of wearing out of gear out means fewer parts to wear out. No overheat due to continuous operation. | Soft Start and Soft Stop (4S tech) | Quieter and smoother.
Make opener and door life span last longer. | LED Bright Lighting System | Green energy (saving electrical power).
Do not need to replace light bulb any more. | Industrial based nylon plastic base | Absorbs vibration & noise, safer for use. | Auto Reverse Protection System | Reduction in the risks of personal injury and property damage in case of an accident. | Rolling Code Technology (ROC) | Make your door more secure by eliminating possible code intercepting and duplication. | Pre-assembled aluminium chain rail | Lower noise, solid and neat, non rusty & easier to install. | Pressed Metal Sprocket and Spine Connection | Long lasting, torque force is evenly distributed resulting in lower vibration and noise. | Clear plastic cover on the adjustment section | More protection so safer while better appearance. | Interference Indicator | Detects any possible radio interference to the receiver |
Specifications: Power Input: 240V / 110V, 50 - 60Hz | Lifting Force: 1,000 Newton | Radio Frequency: 433Mhz | Motor: 24V Direct Current | Transmitter Storage: up to 21 codes | Adjustable Force: 5Kg per unit | Receiver: Low brand, Rolling Code | Chain Rail: Pre-assembled, Fully adjustable | |
Package Information:
Content: Power Head, Two Key and one Wall Mounted Transmitters, Parts Kit and Owner's Manual, Chain Rail Kit (packed separately).
Size and Weight: Power Head Kit: 200H x 255W x 510L (MM), 7.5 KG;
Chain Rail Kit: 45H x 75W x (1800, 3000, 3300,3650, 3800) L (MM), 12, 20, 23, 24 KG Back to Top |
|
